Description
ComNet Electrical Substation-Rated 10/100/1000 Mbps 3-Port Self-managed Ethernet Switch – 3 Ports – Manageable – 2 Layer Supported – Modular – 1 SFP Slots – Twisted Pair
Optical Fiber – DIN Rail Mountable
Panel-mountable
Wall Mountable – Lifetime Limited Warranty 10/100/1000 MBPS 3PORT
The ComNet RLGE2+1SMSPOEHO is a substation-rated and industrially hardened 3-port self-managed Ethernet switch with uplink management capability
that supports Universal PoE (Power over Ethernet) powered devices requiring up to 60 watts of operating power. Designed to the requirements of IEC 61850-3
IEEE 1613 Class 2
EN50155
and NEMA TS-1/TS-2
it is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered
such as electrical utility substations and switchyards
heavy manufacturing facilities
trackside and roadside electronic equipment
and other difficult out-of-plant applications. User-selectable link fault pass-through provides remote indication of a network fault
and two summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power. The 10/100/1000BASE-TX ports support both autonegotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required. The RLGE2+1SMSPOEHO comes pre-programmed
preventing network video flooding with DIP-switch selection of the SFP port as uplink or as an unmanaged switch. The internal/self-contained power supply features redundant 48 VDC inputs
for the highest possible reliability. The simple to install
plug-and-play RLGE2+1SMSPOEHO is DIN-rail or panel-mountable
and is ideal for mission-critical applications where very high levels of reliability and network availability are of the utmost importance.
FEATURES:
- Supports PoE PDs (Powered Devices) requiring PoE (15 watts)
PoE+ (30 watts)
and Universal PoE/PoE++ (60 watts) - Full duplex transmission of 10/100/1000 Mbps Ethernet: (2) 10/100/1000BASE-TX ports and (1) 100BASE-FX or 1000BASE-FX SFP port
- Designed to the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations
EN50155 for railway applications
and NEMA TS-1/TS-2 for traffic signal control equipment
and IEC/EN60950-1 - Extended ambient operating temperature range of -40º to +85º C
for use in virtually any environment. Optional conformal coating available for humidity with condensation or airborne particulate matter environments - Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers
optical connector types
and optical transmission distances of up to 120 km - Link fault pass-through provides a remote indication of a network fault
- 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required
- 48 VDC operating power
- Internal/self-contained high-reliability power supply eliminates the need for an external power supply
and a screw terminal block connects directly to the power source for permanent
reliable
and maintenance-free operation - Features redundant power inputs
for extremely high levels of reliability and availability - No fans or forced-air cooling required; cooling via natural convection eliminates unreliable and troublesome fans/moving parts for improved reliability
- Indicating LEDs confirm operating status of the switch and the link for ease in troubleshooting
- Summary fault alarm provides a local or remote indication via dry contact closure in the event of loss of optical link or operating power
- Rugged 19-gauge galvanized & powder-coated steel enclosure may be DIN-rail or panel-mounted
- Made in the USA
- Lifetime Warranty
