802.11AC W2 AP W/CA 4X4:3 INT ANT 2XGBE T DOMAIN

Description

Cisco Aironet AP2802I IEEE 802.11ac 5.20 Gbit/s Wireless Access Point – 5 GHz, 2.40 GHz – MIMO Technology – 2 x Network (RJ-45) – Gigabit Ethernet

• 802.11ac Wave 2 support
• Provides a theoretical connection rate of up to 2.6 Gbps per radio-roughly double the rates offered by today’s
• high-end 802.11ac access points.
• High Density Experience Best-in-Class RF Architecture, which provides high performance coverage for a high density of client devices
• giving the end user a seamless wireless experience. HDX leverages features such as custom hardware in
• 802.11ac Wave 2 radios, CleanAir, ClientLink 4.0, Cross-access point noise reduction, and an optimized client
• roaming experience.
• Multiuser Multiple-Input Multiple-Output (MU-MIMO) technology
• Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.
• 160 MHz Channel Support Supporting Channels up to 160MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically
• switch between 20, 40, 80, and 160MHz channels depending on the RF Channel conditions, providing the
• industry’s best performing wireless network.
• Cross-access point noise reduction
• A Cisco innovation that enables access points to intelligently collaborate in real time about RF conditions so that
• users connect with optimized signal quality and performance.
• Optimized access point roaming
• Helps ensure that client devices associate with the access point in their coverage range that offers the fastest data
• rate available.
• Zero Impact Application
• Visibility and Control
• Leverages dedicated hardware acceleration to improve performance of line speed applications such as Application
• Visibility and Control.
• Flexible Radio Assignment
• Allows the access points to intelligently determine the operating mode of serving radios based the RF
• environment. The access points can operate in the following modes:
• 2.4GHz and 5GHz Mode, one radio will serve clients in 2.4GHz mode, while the other serves clients in 5GHz mode.
• Dual 5GHz Mode, both radios inside the access point to operate on the 5GHz band, maximizing the benefits of 802.11ac wave 2 and increase client device capacity.
• Security Monitoring and 5GHz Mode, One radio will serve 5GHz clients, while the other radio is scanning the full spectrum for wIPS attackers, cleanAir interferers, and rogue devices.
• Wireless Service Assurance Mode, One radio will serve 5GHz clients, while the other radio is proactivity monitoring the wireless network to ensure the highest overall performance.
• Dual 5GHz Radio Support Enables both radios to operate in 5GHz client serving mode, allowing an industry leading 5.2Gbps (2 x 2.6Gbps) over the air speeds while increase client capacity
• Auto LAG Support
• 802.3ad (LACP) compliant allowing both Gigabit Ethernet interfaces to automatically LAG increasing overall throughput to the access point
• ClientLink 4.0
• Cisco ClientLink 4.0 technology to improve downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets.
• CleanAir 160MHz
• Cisco CleanAir technology enhanced with 160MHz Channel Support, provides proactive, high-speed spectrum intelligence across 20-, 40-, 80-, or 160-MHz-wide channels to combat performance problems due to wireless
• interference.